Software & Firmware Downloads

Important! Please read the instructions below before updating. If an incorrect firmware is used, the product will no longer function correctly. This firmware is only for AVIC-F700BT and AVIC-F900BT which are NOT updated with CNSD-100FM or CNSD200FM.

How to check your current firmware and map version:
1. Switch on your Navigation unit by switching on the ignition of your car. If you don’t see “Top Menu” displayed on top of the display, press the ”MENU” button
2. Select "Settings"
3. Select "System Settings"
4. Select "Service Information"
5. You should see: 

Map version: 01.xxxxxx
Version: 2.xxxxxx

Check the "Map version" to know if your product was updated with a map update:

• If the Map version is 03.xxxxxx please use the "Firmware for products with CNSD-200FM update" (on this page).
• If the Map version is 02.xxxxxx, please use the "Firmware for products with CNSD-100FM update" (on this page).
• If the Map version is 01.xxxxxx, please use this update if the Version is lower then 2.009000.

Important! Please read the instructions below before updating. If an incorrect firmware is used, the product will no longer function correctly. This firmware is only for AVIC-F700BT and AVIC-F900BT which are updated with CNSD-100FM.

How to check your current firmware and map version:
1. Switch on your Navigation unit by switching on the ignition of your car. If you don’t see “Top Menu” displayed on top of the display, press the ”MENU” button
2. Select "Settings"
3. Select "System Settings"
4. Select "Service Information"
5. You should see: 

Map version: 02.xxxxxx
Version: 3.xxxxxx

Check the "Map version" to know if your product was updated with a map update:

• If the Map version is 03.xxxxxx please use the "Firmware for products with CNSD-200FM update" (on this page).
• If the Map version is 02.xxxxxx, please use this update if the Version is lower then 3.021000.
• If the Map version is 01.xxxxxx, please use the  "Firmware for products without map update" (on this page).

Important! Please read the instructions below before updating. If an incorrect firmware is used, the product will no longer function correctly. This firmware is only for AVIC-F700BT and AVIC-F900BT which are updated with CNSD-200FM(map version 
03) sold in Europe, excluding Russia.​

How to check your current firmware and map version:
1. Switch on your Navigation unit by switching on the ignition of your car. If you don’t see “Top Menu” displayed on top of the display, press the ”MENU” button
2. Select "Settings"
3. Select "System Settings"
4. Select "Service Information"
5. You should see: 

Map version: 03.xxxxxx
Version: 4.xxxxxx

If the Map version is 03.xxxxxx then your product is updated with CNSD-200FM and this is the firmware for you.
If the Map version is 02.xxxxxx, please use the "Firmware for products with CNSD-100FM update" (on this page).
If the Map version is 01.xxxxxx, please use the "Firmware for products without map update" (on this page)